betafpvBetaFPV
Lite 1-2S Brushless Flight Controller (Silverware Firmware)
Manufacturer part no. 00313852_2
$29.99≈ 25.99 €
Price summary
Listed by betafpv at €25.99. Delivered to France, including shipping, VAT and any customs duty, it comes to about €49.19. Prices last checked on 2026-09-16.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
Availability unknown
Estimated landed cost
| Item | €25.99 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €8.20 |
| Total delivered | €49.19 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Specifications (automatically extracted)
Mechanical
| Weight | 30 g |
Description
For fans of Silverware firmware, now you could try the new updated Lite 1-2S Brushless Flight Controller. Come with the LiteSilver firmware and integrated 25mW VTX, this lite 1-2S FC is used on FPV whoop racing advanced kit 2, and it is a great choice for pilots to get into the whoop FPV racing hobby. Bullet Points Come with the LiteSilver firmware, this lite 1-2S FC totally supports a 1-2S brushless motor, which is the most simple and affordable method to try the whoop FPV racing hobby. Integrates with the 25mW VTX, this board is ultralight only 3.81g, perfectly suitable for weight-sensitive drones such as FPV whoop racing advanced kit 2. Supports Acro mode, Levelmode, Racemode_Angle, Racemode_Horizon, Horizonmode, and Turtle mode. Also, it has the ability to change settings for custom builds or to adapt the personal preferences by OSD menu. Support Smartaudio and USB firmware updating, it is more convenient for pilots to use. Build-in OSD, allows you to select viewing options, such as the voltage of the battery, flight time, flight mode, and setting menu. Includes OSD menu, supports PID tuning, motor rotation changing, and channel mapping of AETR/TAER switching via OSD menu. Specification of Lite 1-2S FC Item: Lite 1-2S brushless flight controller Weight: 3.81g (without antenna and BT2.0 connector) VTX Power: Integrated 25mW VTX CPU: MM32F103KBU6 Six-Axis: MPU6000 Firmware version: LiteSilver Receiver: Support external SBUS/DSMX protocol receiver or SPI CC2500 receiver module (compatible with Frsky_D/Frsky_X_FCC/Frsky_X_LBT) Motor Pin Connecter: 1.25mm Header Pins Mounting hole size: 26mm x 26mm, whoop mounting pattern Specification of ESC Built-in ESC with 5A continuous and peak 6A current Input voltage: 1-2S Lipo ESC firmware: BLHELI_S S_H_50_REV16_7.HEX OSD: BETAFPV LiteOSD Signal support: D-shot150, D-shot300, D-shot600(Default), Oneshot125 Recommend motor: 1102 18000KV motor Diagram for Lite 1-2S FC How to Connect the External Rx to the Lite 1-2S FC For more
