MÄDLERMÄDLER· Timing Belts and Pulleys
Belt tensioner SPANN-BOX® size 0 high tensioning force roller-Ø 55mm (cylindrical) roller width 20mm
Manufacturer part no. 14041201
$130.62≈ 113.43 €
In stock — 1 unitslead time 14 d
Estimated landed cost
| Item | €113.43 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €25.69 |
| Total delivered | €154.12 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Datasheets & documents
Specifications (automatically extracted)
Mechanical
| Weight | 280 g |
Other characteristics
| Recommended belt width max. | 15 mm |
| Tensioning way | 40 mm |
| Width of tensioning roller | 20 mm |
| Material | Plastic |
| Surface | Black |
| Tensioning force | 132 – 60 N |
Description
Material: Housing from thermoplast. Tensioning pulley made of ultra-high-molecular weight polyethylene based on PE-UHMW, electrostatically dissipative. Screws and spring from stainless steel. These small, ready-to install tensioners enable noise reduction and wear reduction at belts. • With spiral, linear spring. On choice two tensioning forces. • With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low (below 32N or 60N). • Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm. • Max. permissible belt speed 3m/s Temperature range: -20°C bis +60°C. * Tensioning way. ** Max. recommended belt width.
Similar products
MÄDLERIn stock
Neoprene timing belt 1400 H 280 teeth belt width 200=50.8mm
€210.46$242.34
View at seller ↗MÄDLERIn stock
Neoprene timing belt 1250 H 250 teeth belt width 200=50.8mm
€175.38$201.95
View at seller ↗MÄDLERIn stock
Neoprene timing belt 1000 H 200 teeth belt width 200=50.8mm
€144.47$166.36
View at seller ↗