MÄDLERMÄDLER· Mechanics & transmission
Bevel gear made of die-cast zinc ZnAl4Cu1 module 1.0 16 teeth bore 6mm
Manufacturer part no.
Manufacturer part no.
Listed by MÄDLER at €2.72. Delivered to France, including shipping, VAT and any customs duty, it comes to about €21.26. Prices last checked on 2026-10-05.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
| Item | €2.72 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €3.54 |
| Total delivered | €21.26 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
| Weight | 7 g |
| Bore | 6 mm |
| Max torque | 14 Ncm |
| Module | 1 |
| No of teeth | 16 |
| Optional counter wheel part no | 35 850 700 |
| Outer diameter | 17.5 mm |
| Material | Zinc die-cast |
| Ratio | 1:1 (16/16) |
| Surface | Blank |
Material: Zinc die-cast ZnAI4Cu1. Shaft angle = 90°. Bores machined. The bevel gears only run as a pair at the stated ratio. In the torque calculation of zinc-die-cast bevel gears only the root strength was considered. Due to the material properties these gears are only to a limited extend suitable for continuous operation. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio.
