MÄDLERMÄDLER· Mechanics & transmission
Friction clutch PD torque adjustable up to 126 Nm outer diameter 100mm pilot bore 25mm max. bore 42mm
Manufacturer part no. 61100400
$1058.88≈ 917.41 €
Price summary
Listed by MÄDLER at €917.41. Delivered to France, including shipping, VAT and any customs duty, it comes to about €1118.89. Prices last checked on 2026-08-07.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
On backorderlead time 14 d
Estimated landed cost
| Item | €917.41 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €186.48 |
| Total delivered | €1118.89 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Datasheets & documents
Specifications (automatically extracted)
Mechanical
| Torque | 1 284,8 kg·cm |
| Weight | 2.24 kg |
Other characteristics
| Bore pilot hole | 25 mm |
| Max bore diameter | 42 mm |
| Max torque dry | 126 Nm |
| Max torque wet | 54 Nm |
| Outer diameter | 100 mm |
| Total length | 53 mm |
| Material | Steel |
| Max speed | 2500 min-1 |
| Product | Friction clutch |
| Spare plates compl set partno | 611 014 00 |
| Surface | Blank |
Description
Material: Steel. Multi-plate friction clutches have proven to deliver an optimal performance when used with slow-starting machines. They are also used as safety couplings. The occuring torque peaks are levelled out by friction clutches. The disk pairing is steel/sintered bronze, with the inner plates of the pairings lined. The composition of the lining means up to 400°C can be withstood short term. At permanent load, however, only up to 250°C. Sintered clutch plates have the advantage of an almost constant friction coefficient even with fast growing circumferential speeds and higher temperatures. The assembly can be used for dry and wet operation. Advantages of these couplings are: Practical dimensions. Easy adjustment and re-adjustment. Inner and outer plates with special splines. Couplings are available pre-drilled -0,2/-0,3 ex stock. Customized bores and feather-key grooves available at surcharge.
Cheaper alternatives
Semantically close products available for less — check the specs match your need.
MÄDLERIn stock
Elastic coupling PU both sides bore 6mm hubs made from stainless steel
€52.99$61.16
View at seller ↗
MÄDLERIn stock
One-piece clamp coupling MAS both sides bore 12mm with keyway steel C45 black oxide finished with bolts DIN 912-12.9
€57.57$66.45
View at seller ↗Similar products
MÄDLERIn stock
Friction clutch PD torque adjustable up to 33 Nm outer diameter 67mm pilot bore 12mm max. bore 25mm
€709.82$819.27
View at seller ↗MÄDLERBackorder
Friction clutch PD torque adjustable up to 230 Nm outer diameter 120mm pilot bore 25mm max. bore 55mm
€1170.26$1350.71
View at seller ↗MÄDLERBackorder
Friction clutch PD torque adjustable up to 62 Nm outer diameter 82mm pilot bore 12mm max. bore 40mm
€795.06$917.66
View at seller ↗MÄDLERBackorder
Friction clutch PD torque adjustable up to 380 Nm outer diameter 145mm pilot bore 25mm max. bore 70mm
€1536.54$1773.47
View at seller ↗